Filter
Top Products
XTP SR HDMI Scaling Receiver • SIS Configuration and Control 24
Command ASCII Command
(host to XTP)
Response
(XTP to host)
Additional Description
Detail filter
Set detail level
EX&HDET} HdetX&] Set the detail level to X&.
Increase detail level
E+HDET} HdetX&]
Increase the detail level.
Decrease detail level
E-HDET} HdetX&]
Decrease the detail level.
View detail level
EHDET} HdetX&]
View the detail level.
Horizontal shift
Set horizontal shift
EX*HCTR} HctrX*] Set horizontal position to X*. The
default value is 32768).
Increase horizontal shift
E+HCTR} HctrX*]
Shift the image right.
Decrease horizontal shift
E-HCTR} HctrX*]
Shift the image left.
View horizontal shift
EHCTR} HctrX*]
View the horizontal position.
Vertical shift
Set vertical shift
EX(VCTR} VctrX(] Set vertical position to X(. The
default value is 32768).
Increase vertical shift
E+VCTR} VctrX(]
Shift the image down.
Decrease vertical shift
E-VCTR} VctrX(]
Shift the image up.
View vertical shift
EVCTR} VctrX(]
View the vertical position.
Horizontal size
Set horizontal size
EX*HSIZ} HsizX*] Set image width to X*. The default
value is based on the selected
output resolution.
Increase horizontal size
E+HSIZ} HsizX*]
Increase the image width.
Decrease horizontal size
E-HSIZ} HsizX*]
Decrease the image width.
View horizontal size
EHSIZ} HsizX*]
View the image width.
Vertical size
Set vertical size
EX(VSIZ} VsizX(] Set image height to X(. The default
value is based on the selected
output resolution.
Increase vertical size
E+VSIZ} VsizX(]
Increase the image height.
Decrease vertical size
E-VSIZ} VsizX(]
Decrease the image height.
View vertical size
EVSIZ} VsizX(]
View the image height.
Image reset
Execute an image reset
A
Img
]
Reset shift and size settings to the
default values.
NOTES:
X& = Picture adjustment
0 to 255 (128 = default)
X* = Horizontal position or size
0 to 65535
X( = Vertical position or size
0 to 65535