Filter
Top Products
XTP SR HDMI Scaling Receiver • Operation 13
F
Enter button — Press this button to navigate the OSD menu or enable or disable front
panel lockout mode (see Front Panel Lockout Mode (Executive Mode) on
page 19).
G
Adjustment knobs — Rotate the horizontal ([) or vertical ({) adjustment knob to
navigate the on-screen display menu or adjust submenu items.
Rear Panel HDMI Audio Switch
The XTP SR HDMI has an HDMI audio switch that mutes or unmutes the
embedded audio on the HDMI output connector. The LED next to the
switch lights when HDMI audio is enabled.
Move and hold the rear panel HDMI audio switch up for about 1 second to enable
embedded audio on the associated HDMI connector, or move and hold the HDMI audio
switch down for about 1 second to disable embedded audio on the associated HDMI
connector. The switch returns to the middle position after it has been released so the device
can continue to be controlled through SIS commands or from an XTP matrix switcher.
Audio Output Overview
By default, an XTP transmitter or matrix switcher prioritizes embedded digital audio over
analog audio. Use SIS commands (see SIS Configuration and Control on page 20) or
the XTP System Configuration Software (see XTP System Configuration Software on
page 29) to manually select the audio input.
Audio Output LEDs
Audio Input Format HDMI S/PDIF Analog
LPCM X X X
Multi-channel PCM X
Dolby Digital 2/0 X X
Dolby Digital 2/0 Surround X X
Dolby Digital 5.1 X X
Dolby Digital EX X X
Dolby Digital Plus X
Dolby TrueHD X
DTS 2-channel X X
DTS Digital Surround 5.1 X X
DTS-ES Matrix 6.1 X X
DTS-ES Discrete 6.1 X X
DTS-HD X
DTS-HD Master Audio X
On-Screen Display Menu System
XTP SR HDMI configuration and adjustments can be performed by using SIS commands
(see SIS Configuration and Control on page 20), the XTP System Configuration
Software (see XTP System Configuration Software on page 29), or by using the front
panel controls and the OSD menu. The OSD menu is used primarily when the receiver is
first set up.
NOTE: The OSD menu has a fixed time-out of 10 seconds.
HDMI
OFF
ON
AUDIO