Filter
Top Products
XTP SR HDMI Scaling Receiver • SIS Configuration and Control 27
Command ASCII Command
(host to XTP)
Response
(XTP to host)
Additional Description
Advanced Configuration Commands
Executive mode
Enable executive mode
1X
Exe1
]
Lock the entire front panel.
Disable executive mode
0X
Exe0
]
Unlock the front panel.
View executive mode
status
X
Exe
X!]
View the executive mode status.
Relay control
Pulse relay
X2)*3*X2!O RlyX2)*X!] Pulse relay X2).
Toggle relay
X2)*2O RlyX2)*X!] Toggle relay X2).
Turn relay on
X2)*1O RlyX2)*1] Turn relay X2) on.
Turn relay off
X2)*0O RlyX2)*0] Turn relay X2) off.
View relay status
X2)O RlyX2)*X!]
View relay status.
Aspect ratio
Set aspect ratio to Fill
E1ASPR} Aspr1]
Fill the entire output raster.
Set aspect ratio to
Follow
E2ASPR} Aspr2]
Use the native aspect ratio of the
input.
View aspect ratio setting
EASPR} AsprX2#]
View the current aspect ratio
setting.
Switch mute
NOTE: The basic mute specifies the mute duration when switching. The advanced mute adds an additional
mute to help compensate for switching between different input resolutions.
Set switch mute
EX3@*X3#AUTB} AutbX3@*X3#]
Set the mute duration between
switching inputs.
View switch mute
setting
EAUTB} AutbX3@*X3#]
View the basic and advanced
mute durations between switching
inputs.
NOTES:
X! = Enable or disable
0 = disabled or off (default)
1 = enabled or on
X2) = Relay
1 = relay 1
2 = relay 2
X2! = Pulse time
1 to 65535 (in 16 ms steps)
X2# = Input aspect ratio
1 = fill (default)
2 = follow
X3@ = Basic mute
0-255 where 1 step = 100 ms or 10 steps = 1 s
(0 = default)
X3# = Advanced mute
0-255 where 1 step = 100 ms or 10 steps = 1 s
(0 = default)