Aastra Telecom 57I IP Phone User Manual


 
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-00, Release 2.1, Rev 04 A-141
Configuration Parameters
Appendix A
Parameter
softkeyN value
Value
(In WEb UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the softkey.
The “softkeyN value” parameter can be set for the following softkey types
only:
speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial softkey; you then
enter the rest of the number from the keypad on the
phone.)
•BLF
sprecode
•Park
•Pickup
•dcp
•XML
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-157. For
Park/Pickup examples, see Chapter 5, the section, “Model 57i/57i CT
Examples” on page 5-155.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$INCOMINGNAME$$
Format Integer
Default Value Not Applicable
Range N/A
Example softkey1 value: 9
softkey2 value: 411
softkey4 value: http://10.50.10.140 script.pl?name=$$SIPUSERNAME$$
softkey5 value: 123456+ (example of a speeddial prefix)