Filter
Top Products
Operational Features
41-001160-00, Release 2.1, Rev 04 5-85
Configuring Operational Features
Operational IP Phone Features
Configuring BLF/BLF List for Directed Call Pickup
Use the following procedure to configure BLF/BLF List for Directed Call Pickup
in the configuration files.
4 Enable the "Play a Ring Splash" field by checking the check box.
(Disable this field by unchecking the box). Default is disabled.)
The IP phone plays a short "ring splash" when there is an incoming call on the BLF monitored
extension. If the "Play a Ring Splash" parameter is enabled, and the host tone is idle, the tone plays
a "ring splash".
5 Click to save your changes.
Note: You must enable Directed Call Pickup before performing these
procedures. See “Enabling/Disabling Directed Call Pickup” on
page 5-84.
Configuration Files
To set BLF or BLF\List in the configuration files for Directed Call Pickup, see Appendix A, the section,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-136.
Aastra Web UI