Filter
Top Products
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-138 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
• flash - Indicates the softkey and/or programmable key is set to
generate a flash event when it is pressed on the 57i and 57i CT, or a
feature key is pressed on the 57i CT handset. The IP phone
generates flash events only when a call is connected and there is an
active RTP stream (for example, when the call is not on hold).
• sprecode - Indicates the softkey and/or programmable key is
configured to automatically activate specific services offered by the
server. For example, if the sprecode value of *82 is configured, then
by pressing the softkey, *82 automatically activates a service
provided by the server.
• park - Indicates the softkey and/or programmable key is configured to
park incoming calls when pressed.
• pickup - Indicates the softkey and/or programmable key is configured
to pick up parked calls when pressed.
• lcr - Indicates the softkey and/or programmable key is configured for
“last call return” when pressed.
• directory - Indicates the softkey and/or programmable key is set for
accessing the Directory List.
• callers list - Indicates the softkey and/or programmable key is set for
accessing the Callers List.
• icom - Indicates the softkey and/or programmable key is set to be
used as the Intercom key.
• services - Indicates the softkey and/or programmable key is set to be
used as the Services key.
• phonelock - Indicates the softkey and/or programmable key is set to
be used to lock/unlock the phone.
• empty - Indicates the softkey and/or programmable key is configured
to force a blank entry on the IP phone display for a specific softkey.
The softkeys are added in order (from softkey1 to softkey20) after any
hard-coded keys have been added. If a particular soft key is not defined,
it is ignored.
Format Text
Default Value none