Filter
Top Products
Network Settings
41-001160-00, Release 2.1, Rev 04 4-25
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4Select Configuration Server.
5Select HTTPS Settings.
Configure HTTPS Client
6Select HTTPS Client.
7Select Client Method.
8 Press Change to select a client method to use for HTTPS. Valid values are:
• SSL 3.0 (default)
•TLS 1.0
9 Press Done to save the changes.
Configure HTTPS Server
10 Select HTTPS Server.
11 Select HTTP->HTTPS.
12 Press Change to select “Yes” or “No”. Default is “No”.
Enabling this feature redirects the HTTP protocol to HTTPS.
13 Press Done to save the changes.
14 Select XML HTTP POSTs.
15 Press Change to select “Yes” or “No”. Default is “No”.
Enabling this feature blocks XML HTTP POSTs from the IP Phone.
16 Press Done (4 times) to finish.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
17 Select Restart.