Filter
Top Products
Operational Features
41-001160-00, Release 2.1, Rev 04 5-105
Configuring Operational Features
Operational IP Phone Features
5 If applicable, in the "Value" field, enter a value to associate with the softkey. For example, for a
speeddial value, you can enter a number you want to use for the speeddial key, or 12345+ as a
speeddial prefix.
6 If applicable, in the "Line" field, select the line for which you want to associate the softkey.
7 Some softkey types allow you to configure specific operational states.
Operational states display to the IP phone when a softkey is used.
To enable/disable an operational state, click the "Idle", "Connected", "Incoming", or "Outgoing"
fields to check or uncheck the box.
Note: Operational states are not applicable to expansion modules.
8 Click to save your changes.
For programmable keys:
9 In the “Hard Key” field, select the programmable key type you want to configure.
Reference: For available type values on each IP phone model, see Appendix A, the section,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-136.
10 In the "Value" field, enter a value to associate with the programmable key. For example, for a
speeddial value, you can enter a number you want to use for the speeddial key, or 12345+ as a
speeddial prefix.
11 In the "Line" field, select the line for which you want to associate the programmable key.
12 Click to save your changes.
Aastra Web UI