Firmware and Configuration Files
41-001160-00, Release 2.1, Rev 04 1-21
Overview
Overview
Firmware and Configuration Files
Description
When the IP phone is initialized for the first time, DHCP is enabled by default.
Depending on the type of configuration server setup you may have, the IP phone
may download a firmware version and configuration files automatically, or you
may need to download it manually.
The firmware consists of a single file called:
• <phone model>.st
The configuration files consist of two files called:
• aastra.cfg
•<mac>.cfg
The following table provides the firmware for each Aastra IP phone model.
The IP Phone firmware file includes all the necessary files you need for your
phone, including the language files. Loading the language files to your phone(s) is
optional. For more information about loading languages files, see Chapter 5, the
section, “Customizing the Display Columns on the 560M Expansion Module” on
page 5-224.
Note: Automatic download is dependant on your configuration server
setup.
IP Phone
Model
Associated
Firmware
53i 53i.st
55i 55i.st
57i 57i.st
57i CT 57i Cordless.st