Filter
Top Products
Operational Features
5-154 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Operational IP Phone Features
On 57i/57i CT
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that you
configured for the Park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup softkey
displays on other phones in the network. You can then press the "Pickup"
softkey, followed by the applicable value to pickup the call on another phone
in your network.
• On the 57i CT, the customized labels apply to the base unit only. On the 57i
CT handset, pressing Ï displays the default labels of "Park" and "Pickup".
On 53i
• When a call comes in, and you pickup the handset, you can press the
applicable "Park" programmable key to park the call.
• After the call is parked, you can press the "Pickup" programmable key,
followed by the applicable value to pickup the call.
You can configure a Park and Pickup key configuration using the configuration
files or the Aastra Web UI.
Notes:
1. On the 57i CT, the customized labels apply to the base unit only. On
the 57i CT handset, pressing Ï displays the default labels of "Park" and
"Pickup".
2. On the 57i/57i CT, the old softkey labeled "Pickup" has been
renamed to "Answer". This softkey uses the old functionality - when you
pickup the handset, you see a softkey labeled "Answer". You can then
press this key to pick up an incoming call. Do no confuse this feature
with the new Park/Pickup configuration feature.