Filter
Top Products
Network Settings
41-001160-00, Release 2.1, Rev 04 4-35
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
6Select Type of Service SIP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP.
7 Enter a value for “Type of Service SIP”. Default is 26.
or
Enter a value for “Type of Service RTP”. Default is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
Valid values are 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page 4-33 For more information, see the section “Configuring VLAN (optional)” on page 4-37.
8 Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
9Select Restart.
IP Phone UI
Step Action