Filter
Top Products
IP Phone Models
41-001160-00, Release 2.1, Rev 04 1-11
Overview
Overview
*See the Aastra 55i User Guide for more information about each of these keys.
Softkeys - 6 Bottom keys: programmable state-based softkeys (up to 20
programmable functions).
By default, keys 1 through 6 have no assigned functions. You can configure all 6
bottom softkeys to perform specific functions on the 55i IP phone. However, after
you lift the handset, there are specific static softkeys that display that cannot be
changed. These are as follows:
1 - DIAL Allows you to dial out on the phone.
2 - CONF Begins a conference call with the active phone.
3 - XFER Transfers the active call to another number.
Note: For more information about configuring softkeys 1 through 6 to perform
specific functions, see Chapter 5, “Configuring Operational Features” the section,
“Softkeys/Programmable Keys/Feature Keys/Expansion Module Keys” on
page 5-93.
Keys Key Description