Filter
Top Products
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-00, Release 2.1, Rev 04 A-137
Configuration Parameters
Appendix A
Softkey Settings for 55i, 57i, 57i CT
The value of "N" for the following parameters is dependent on the number of
softkeys available on the55i, 57i, and 57i CT models. See the table above for
applicable values.
Parameter –
softkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
•none - Indicates softkey and/or programmable key is disabled.
• line - Indicates softkey and/or programmable key is configured for
line use.
• speeddial - Indicates softkey and/or programmable key is configured
for speeddial use. Speeddial is applicable to the 536M and 560M
also. You can configure a softkey to speeddial a specific number by
pressing that softkey. Optionally, you can also configure a speeddial
key to dial prefix numbers. With this option, the prefix numbers
automatically dial when you press the softkey, and the phone waits
for you to enter the remaining numbers to dial out.
Note: When there is an active call, the speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first put
the active call on hold and then press the speeddial key.
• dnd - Indicates softkey and/or programmable key is configured for do
not disturb on the phone. This option is "Do Not Disturb" in the
Aastra Web UI).
• blf - Indicates softkey and/or programmable key is configured for
Busy Lamp Field (BLF) use. User can dial out on a BLF configured
key. Maximum of 50 BLFs are applicable to the 536M and 560M also.
• list - Indicates softkey and/or programmable key is configured for
BLF list use. (This option is BLF/List in the Aastra Web UI). User can
dial out on a BLF List configured key.
• acd - (for Sylantro Servers only) Indicates the programmable key is
configured for auto call distribution (called “Auto call distribution” in
the Aastra Web UI). The ACD feature allows the Sylantro server to
distribute calls from a queue to registered IP phone users (agents).
• dcp - (for Sylantro Servers only) Indicates the programmable key is
configured for either directed call pickup or group call pickup (called
“Directed Call Pickup” in the Aastra Web UI). The Directed Call
Pickup/Group Call Pickup feature allows you to intercept or pickup a
call on a monitored extension or a group of monitored extensions.
• xml - Indicates the softkey and/or programmable key is configured to
accept an XML application for accessing customized XML services.
You can also specify an XML softkey URL for this option.
•