Filter
Top Products
System & Station
Program 16 – Assign CO Line Groups (or Dial 9)
Strata DK Programming 5/00 3-51
System & Station
Program 16 – Assign CO Line Groups (or Dial 9)
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: System
Initialized Default: All CO lines assigned to the Dial 9 group
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor Type CO Line Range CO Line Groups Processor Type CO Line Range CO Line Groups
DK14 001~004 01~04 B1CU 001~032 01~04
DK40i 001~012 01~08 B2CAU/BU 001~120 01~16
RCTUA 001~016 01~08 B3CAU/BU 001~120 01~16
RCTUBA/BB 001~048 01~08 B5CAU/BU 001~200 01~16
RCTUC/D 001~144 01~16
RCTUE/F 001~200 01~16
LED
Line
Number
CO Line Groups
Dial
9(00)
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
SELECT = CO Line Group (see legend)
Only enter the last two digits of the CO line Group,
or enter
for Dial 9 group.
Press
6FUROO to advance or 3DJH to go back.
To advance the CO line range, press
6FUROO
located beneath the LCD. Press
3DJH for a lower
range.After programming, press:
9RO▲ to turn all LEDs On
9RO▼ to turn all LEDs Off
0RGH and CO line number, then to display and
advance
LED Buttons = CO line
Specify CO line by setting LEDs as defined by the
table below. When you are finished, all LEDs with
an “X” should be lit.