Filter
Top Products
System & Station
Program *33 – [PhDN] Owner Telephone Assignment
3-96 Strata DK Programming 5/00
Program *33 Overview
This program assigns each [PhDN] to a designated “Owner” telephone. Each [PhDN] must be
assigned to a designated “Owner” telephone and that [PhDN] must be assigned (using Program 39)
to appear on the owner telephone. If a [PhDN] is not assigned to an “Owner” telephone, it cannot
receive calls (caller will receive reorder tone) but it can be used to originate calls.
If the [PhDN] owner telephone is unplugged, the [PhDN] is busy (vacant) when called, unless CF-
All Call is set, in which case, it will forward. A telephone can be assigned as “Owner” of up to
eight [PhDNs].
[PhDN] “Owner” telephones have the following attributes for the [PhDNs] that it is assigned to
own:
♦ Set Call Forward for all [PhDNs] that the telephone owns.
♦ Set Call Forward to a VM Mail Box and Message Retrieve ID codes (#656/#657), independent
of the telephone’s Voice Mail assignments. This “CF to” VM Box can be the same as the
Owner telephone’s VM Box or any other VM Box, including a dedicated VM Box for the
[PhDN].
♦ Have up to four [PhDN] Message Waiting (MW) LEDs (Program 39, flexible button). This
[PhDN] MW button indicates that the [PhDN] has a message waiting from voice mail or
another [DN] - again independent of the telephone’s fixed Msg LED.
♦ Store ANI and/or Caller ID information for abandon calls directed to the [PhDN]. The [PhDN]
Owner telephone must be assigned “Abandon Call Memory” in Program 51 if the [PhDN]
rings on more than one telephone.
♦ Can receive OCA calls to the [PhDN].