Filter
Top Products
System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
Strata DK Programming 5/00 3-127
System & Station
Program *41-2 – T1 Channel Assignments
Initialized Default: 1 = Loop Start
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG Turn System Power Off (5 sec) then On
Processor Type CO Line Range Processor Type CO Line Range
DK40i 001~012 B1CU 001~032
RCTUA 001~016 B2CAU/BU 001~120
RCTUBA/BB 001~048 B3CAU/BU 001~120
RCTUC/D 001~144 B5CAU/BU 001~200
RCTUE/F 001~200
RDTU:___________ Slot:___________ RDTU:___________ Slot:___________ RDTU:___________ Slot:___________
RDTU Channel No. Line Type RDTU Channel No. Line Type RDTU Channel No. Line Type
111
222
333
444
555
666
777
888
999
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
More channels
or...
Run Program 91-2
SELECT = 2
Enter the RDTU being programmed (1~8).
Enter the RDTU channel number (01~24)
to be assigned a line type.
To add a port range, enter XXX✱XXX
(low port ✱ high port).
Enter the line type to be assigned to the RDTU channel:
See Programs 17 and 71 for other Tie/DID assignments.
See Program *17 and Program *09 for other DID assignments.
1 = Loop Start (initialized) 4 = Tie (Wink)
2 = Ground Start 5 = DID (immediate)
3 = Tie (immediate) 6 = DID (Wink)