Toshiba DK14 Telephone User Manual


 
System & Station
Program *30 Telephone Group Page Assignments
3-82 Strata DK Programming 5/00
Program *30 Telephone Group Page Assignments
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Station
Initialized Default: All LEDs Off
Shaded groups apply to RCTUC/D and RCTUE/F only.
Program *30 Overview
Digital and electronic telephones can be assigned to internal telephone speaker page groups with
this program. Each group can have as many as 120 stations. Telephones can be a member of more
than one group. Station users can access each group separately by dialing access codes. (See
Program 05 for access codes.) The above table shows four or eight page groups. An additional
group is the All Call Page Group set in Program 31, LED 10.
Notes
A maximum of 120 telephones can be assigned to a particular page group.
Only 120 telephones can be paged simultaneously. Example: If Page Group A has 60
telephones, Page Group B has 50 telephones, and Page Group C has 70 telephones, then
Group A + B (60 + 50 = 110) can be paged simultaneously, but Group A + C (60 + 70 = 130)
cannot be paged simultaneously.
  6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor Type Port Range Number of Page Groups Processor Type Port Range Number of Page Groups
DK14 000~009 4 B1CU 000~055 4
DK40i 000~027 4 B2CAU/BU 000~111 8
RCTUA 000~031 4 B3CAU/BU 000~191 8
RCTUBA/BB 000~079 4 B5CAU/BU 000~335 4
RCTUC/D 000~239 8
RCTUE/F 000~335 8
Feature LED
Port
Page Group H
08
Page Group G
07
Page Group F
06
Page Group E
05
Page Group D 04
Page Group C 03
Page Group B 02
Page Group A 01
Enter the station logical port which will be assigned
to page a group or groups. To add a port range,
enter XXXXXX (low port high port).
Press LED Buttons 01~08 to light LEDs for the port
specified in the last step. In the table below, X all
LED Buttons which should be lit.