Filter
Top Products
Overview
How to Program a Strata DK System
Strata DK Programming 5/00 1-11
Overview
Program Sequence
Detailed data entry instructions are on the top of each record sheet (see Figure 1-2).
➤ To use the program sequence on the record sheet
1. From the programming telephone, enter the programming mode by pressing a series of shaded
buttons. The shaded buttons represent the entry sequence for all programs.
2. Enter the program number. This sequence is unique for every program. The buttons are white
on every record sheet.
3. Enter the program data. Again, this sequence is unique for every program. The buttons are
white on every record sheet. To make another entry, repeat this step until ready to exit the
current program.
4. Exit the current program. This sequence never changes, and the buttons are always shaded.
Upon exiting the current program, repeat Step 2 to enter another program, or continue with
Step 5 to exit the programming mode entirely.
5. Exit the programming mode by pressing the same button sequence as in Step 4. This sequence
also never changes and is always shaded.
More Data
Another Program
Step 1
Enter Program Mode
(Do not press or [DN] button)
Step 2
Enter Program Number
Step 3
Enter Program Data
Step 4
Exit Current Program
Step 5
Exit Program Mode
and/or
(LED Buttons)or
1697
Figure 1-2 Programming Button Sequence Overview