Filter
Top Products
System & Station
Program *31 – Group Pickup Assignments
Strata DK Programming 5/00 3-89
System & Station
Program *31 – Group Pickup Assignments
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Station
Initialized Default: All LEDs Off
Program *31 Overview
Stations can be divided into as many as 20 pickup groups (see the legend above the record sheet).
Station users can pick up calls (internal or line) that are ringing any station within their group by
dialing a single access code (or with a
&DOO3LFNXS button assigned with Code 480 in Program 39),
and pick up calls that are ringing stations in other groups by dialing selected access codes.
Stations can belong to more than one group. (See Program 05 for access codes.) This feature also
picks up ringing transfer and hold recall calls, but does not pick up held calls or selectively by
directory number.
To pickup held or ringing [PDN] and/or [PhDN] calls selectively, use the
+ XXX pickup
access code (where XXX is the [PDN] or [PhDN]).
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor Type Port Range Pickup Groups Processor Type Port Range Pickup Groups
DK14 000~009 8 B1CU 000~055 20
DK40i 000~027 16 B2CAU/BU 000~111 20
RCTUA 000~031 20 B3CAU/BU 000~191 20
RCTUBA/BB 000~079 20 B5CAU/BU 000~335 20
RCTUC/D 000~239 20
RCTUE/F 000~335 20
Pickup Group LED
Port
Pickup Group 20 20
Pickup Group 19 19
Pickup Group 18 18
Pickup Group 17 17
Pickup Group 16 16
Pickup Group 15 15
Pickup Group 14 14
Pickup Group 13 13
Pickup Group 12 12
Pickup Group 11 11
Pickup Group 10 10
Pickup Group 9 09
Pickup Group 8 08
Pickup Group 7 07
Pickup Group 6 06
Pickup Group 5 05
Pickup Group 4 04
Pickup Group 6 03
Pickup Group 2 02
Pickup Group 1 01
Station Logical Port Number
Enter the station logical port which will be assigned to a pickup
group or groups. To add a port range, enter XXX✱XXX (low port ✱
high port).
Light LED Buttons for the port specified in the last
step. In the table below, mark an “X” for all LED
Buttons which should be lit.