Toshiba DK14 Telephone User Manual


 
System & Station
Program 77-4 RSIU Open Architecture Interface (OAI) Data Output Assignments
Strata DK Programming 5/00 3-171
System & Station
Program 77-4 RSIU Open Architecture Interface (OAI)
Data Output Assignments
Processor Type: All RCTUs and BCUs (Release 3.2 and above)
Program Type: System
Initialized Default: All LEDs are Off
Program 77-4 Overview
This program is used to enable Caller ID, Automatic Number Identification (ANI), and/or Dialed
Number Identification Service (DNIS) Numbers (received) to be sent from the RSIU Open
Architecture Interface (OAI) port. The OAI port sends MIS data for ACD calls (only) along with
ANI, Caller ID and/or DNIS Numbers received on ACD calls depending on LED 01 and LED 02
option settings. ANI, Caller ID and/or DNIS numbers on non-ACD calls will not be sent out the
OAI port for non-ACD calls.
   6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
LED/
Button
X LED On LED Off
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02 DNIS Number will be sent from OAI port DNIS Number will not be sent from OAI port
01 Caller ID/ANI will be sent from OAI port Caller ID/ANI will not be sent from OAI port
Light the LED Buttons that are
marked with an X in the table below.
SELECT = 4