Toshiba DK14 Telephone User Manual


 
E911
Program *11-0 E911/CAMA Trunk Assignments
Strata DK Programming 5/00 8-5
E911
When this feature is used, the station or Attendant console that answers the E911 notification call
will be connected in a three party conference with the E911 calling telephone and the E911 CAMA
trunk (E911 dispatch person who answers the 911 call). The CESID information and user name of
the 911 calling station displays on all Attendant Console monitors and E911 notification telephone
LCDs when the E911 notification call rings.
LED 02: CAMA Trunk Disconnect Operation Options
After an E911 call is established, disconnecting the calling or notified telephone (or notified
telephone/console) from the CAMA trunk can be controlled exclusively by the E911 trunk
(dispatch person receiving the 911 call).
The disconnect operation for each option is:
LED 02 Off: Allows either the E911 call originating telephone or 911 dispatcher to disconnect
the CAMA trunk. In the following example, conversation exists between originating
telephone, notified telephone/console and the E911 CAMA trunk dispatch person.
LED 02 On: Enables E911 call disconnect to be exclusively controlled by the dispatch person
receiving the call on the E911 CAMA trunk. In the following table, conversation exists
between originating telephone, notified telephone/console and the E911 CAMA trunk dispatch
person.
LED 01: Number of CESID location digits sent with E911 Calls
After 911 is sent out the CAMA trunk, Automatic Number Identification (CESID) location digits
are sent out the CAMA trunk to identify the location of the station. The maximum number of
CESID digits sent with each E911 call can be either 7-digits (LED 01 On) or 10-digits LED 01
Off). CESID location digits are individually set in Program *12 for each station. Contact your
local E911 CAMA trunk provider to determine the number of CESID digits required.
E911 originator hangs up
and disconnects.
The E911 notified station and the E911 CAMA trunk remain
connected. The notified station can disconnect from the CAMA trunk.
E911 notified station hangs
up and disconnects.
The E911 originating station and the E911 CAMA trunk remain
connected. Originating station can disconnect from the CAMA trunk.
E911 dispatcher hangs up
and disconnects.
All parties are disconnected, CAMA trunk goes idle.
E911 originator hangs up
and disconnects.
The E911 notified station cannot disconnect from the E911 CAMA
trunk.
E911 notified station hangs
up and disconnects.
The E911 originating station cannot disconnect from the E911 CAMA
trunk.
E911 dispatcher hangs up
and disconnects.
All parties are disconnected, CAM trunk goes idle.