Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
8
1. Transfer a call by H.450 transfer function. Press TRANSFER button in communication and
press phone No. which user want to transferred to can transfer this call .
2. Change characters to be capital or lowercase: when press TRANSFER before press letters
can switch type of letters.
♦ REDIAL: Redial the last outgoing call.
♦ + and - : Adjust the voice volume in communication.
♦ SPEAKER: Speaking without picking up handset.
Note: All function keys mentioned above (except Number 1 –10, * and # ) are effective only in IP
Phone mode.
2.Back View
♦ DC 9V: DC 9V power input outlet
♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable.
♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
♦ Line: RJ-11 connector, connected directly to the PSTN analog line.
Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port. When
network status is in normal, LED of LINK/ACT will be flashing; when transmit rate is in 10
mbps/100mbps, LED of 10/100 will light off/on .