Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
15
(2) Ring Volume Control
User can adjust ring volume by by press or on the keypad to decrease or
increase volume.
4. Indicate Forward Type
There are two selections to activate or deactivate forward function. After selection please
press OK
(1).Activate : choose under which situation to forward call to another endpoint. After
selection please press OK, then enter LINE NUMBER of another
endpoint prepared to forward to.
1. Busy
When IP Phone 100 is in busy status, the incoming call will be directly forwarded to
the assigned phone number.
2. No response
When IP Phone 100 is continuing ringing around 10 seconds, the incoming call will
be directly forwarded to the assigned phone number.
3. Unconditional
It is included the above two types. Whether the IP Phone is in which status, it will be
automatically forwarded to the assigned phone number.
(2).Deactivate : choose under which situation to deactivate forward function. After
selection, please press OK , then user can see LINE NUMBER of the
endpoint which is already configured to forward to, now press OK
again.
Note: The number that user prepares to forward to is E.164 number which is
registered on the GateKeeper.
5. Message Box
If there is an unanswered IP call, it will be kept in message box . MESSAGE LED will be
flashing until user press MESSAGE to check miss call and re-press MESSAGE to return
to main screen.
1. New Call to see all incoming-call records in message box.
2. History to see all records in message box.
Choose Tone Style:
Low Middle High