Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
19
5. [commit] command
Save any changes after configuring the IP Phone 100.
6. [ifaddr] command
Configure and display the IP Phone 100 IP information.
1. -ip, -mask, -gate: Set IP Phone 100 IP Address, subnet mask and default gateway
respectively.
2. -dhcp: When DHCP function enables (ifaddr –dhcp 1), IP Phone 100 will automatically
search DHCP server after execute the commit and reboot command.
Note: After IP Phone catch a dynamic IP address form DHCP server, user can see this IP
address on LCD connect configuration.
3. -sntp: When sntp server is available, enable IP Phone 100 SNTP function and point to sntp
server IP address. (ifaddr –sntp 1 “xxx.xxx.xxx.xxx”)
4. -dns:User can set Domain Name Server IP address. Once IP Phone can connect with DNS
server, user can specify URL address instead of IP address for gatekeeper and phone book IP
address. (please refer to 12.[h323] command and 3.9[pbook] command)
5. –timezone: User can set different time zone according to the location IP Phone is. For
example, in Taiwan the time zone should be set as 8,which means GMT+8. (GMT-8:
ifaddr –timezone -8)
6. -ipsharing: If IP Phone 100 is behind a IP-sharing , user can enable IP sharing function and
specify public IP address.(ifaddr –ipsharing 0/1 “public IP address of IP sharing” , 0 for
disable and 1 for enable)
7. -cmcenter: Set management center IP address. IF user specifies management center IP
address, IP Phone will send information to management center, let user can easily configure
via management center interface. (ifaddr –cmcenter “IP address of management center” ;
ifaddr –cmcenter x to disable this function)