Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
12
IP Phone provide alternative GateKeeper feature, if IP Phone can’t register to
Main GateKeeper for 10 times, it will try to register to the Second GateKeeper.
When main GateKeeper can’t work normally, IP Phone can still keep working
with Second GateKeeper
(8) SNTP Configuration
IP Phone 100 supports that user can assign one SNTP (Simple Network Time
Protocol) Server in your country by setting in IP Phone. User has to offer one
available SNTP server IP Address and set this IP Address on the IP Phone
keypad.
(A) SNTP Mode: User can set different time can set SNTP function too be
on/off/broadcast, which means IP Phone will capture current time from
SNTP server or not, or broadcast to find a SNTP server and capture current
time.
(B) SNTP Server: User can specify a SNTP server for IP Phone to capture
current time.
(C) Time Zone: User can set time zone according to the location IP Phone is.
For example, in Taiwan the time zone should be set as 8,which means
GMT+8.(user can press “*” as “-“)
Note: If user didn’t set SNTP server, on LCD won’t display current time.
(9) Connection Mode
There are 2 types for IP Phone 100 to connect to the other devices. They are GK,
P2P. The default mode is in GK mode. When user would like to connect via P2P
mode, the IP Phone 100 must change as well. Move the “~” symbol by press
or on the keypad to select one mode.
(10) DHCP Mode (ON/Off)
User can set IP Phone in DHCP mode, which means IP Phone will get a dynamic
IP automatically.
(11) Token Password
(A) LCD menu password: User can enter LCD system configuration by key in
this password
(B)H.235 security: To set RRQ/ARQ authentication token password. If IP
Phone wants to register to a GateKeeper, which implement H.235 security
token feature, IP Phone has to set a RRQ/ARQ authentication token
password, which is provided by GateKeeper manager. IP Phone can’t work
normally with this GateKeeper unless Token Password is set.