Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
7
♦ Number 1 –10, * and #: The function is as the same as the general phone set.
Corresponding list of keypad and symbol:
1 “Space” ; “,” ; “.” ; “!” ; “1”
2 “A” ; “ B” ; “C” ; “2”
3 “D” ; “E” ; “F” ; “3”
4 “G” ; “H” ; “I” ; “4”
5 “J” ; “K” ; “L” ; “5”
6 “M” ; “N” ; “O” ; “6”
7 “P” ; “Q” ; “R” ; “S” ; “7”
8 “T” ; “U” ; “V” ; “8”
9 “W” ; “X” ; “Y” ; “Z” ; “9”
* “-“ ; “?” ; “*”
0 “0”
# “_” ; “@” ; “#”
♦ MUTE: Mute the voice of MIC and let others can’t hear from user in communication.
♦ PSTN: Press PSTN to switch IP Phone 100 as PSTN or IP Phone Mode. In PSTN mode,
“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as if
standard telephone set in PSTN ; in IP Phone mode , “GK” characters will be displayed on
LCD left bottom side.
Note:1. When IP Phone is in PSTN mode, only PSTN and SPEAKER function key can work.
2. On LCD will display ”….Incoming Call…. ” to notice user when IP Phone has both IP
and PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side, then press PSTN
to pick up PSTN side, after that can press HOLD again to retrieve IP side.
4. I
f
in communication with PSTN side, user must han
g
up PSTN side be
f
ore pick up IP side
by pressing PSTN.
♦ HOLD: To hold a call with H.450 function.
♦ SPEED: Press SPEED and number (Phone book index) to do speed dial according to phone
book data (please refer to LCD configuration-Phone Address Book or Advanced
Configurations via Telnet-[pbook] command ).
♦ FORWARD: Forward a incoming call to another IP device by H.450 forward function.(please
refer to LCD configuration-Indicate Forward Type)
♦ MESSAGE and its indicated LED light: When missing the incoming calls, the message LED
will be flashing. User can know the information of miss call by pressing the message button.
♦ TRANSFER: