Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
14
User has to press the file name of new application rom file prepared for upgrading
(5) Start Download
Press OK to start download new application rom file. After download is finished, IP
Phone will automatically reboot.
(6) Firmware Version
Show versions of all rom files and hardware.
Note: Download via LCD command can only upgrade new application rom file.
4. Hardware Test
IP Phone 100 provides self-test for all functions buttons. Please follow the direction
from LCD panel to operate and verify it.
5. Reboot
It is necessary and important for user to reboot it after any configurations has been
made to the IP Phone 100.
2. User Line Number
User has to identify at least one number for the IP Phone 100 to register to the GateKeeper.
User can set up to 10 different numbers.
(1) Line Number 1
(2) Line Number 2
(3) Line Number 3
(4) Line Number 4
(5) Line Number 5
(6) Line Number 6
(7) Line Number 7
(8) Line Number 8
(9) Line Number 9
(10) Line Number 10
Note: User can set six zero “000000” on LCD to disable this number and the number
after this one. Ex. Line Number 1-5 are configured, if user set Line 3 as “000000”,
Line number 3-5 will be disabled.
3. Ring Configuration
(1) Ring Style Selection
There are three tone styles for IP Phone 100. Move the “~” symbol by press or
on the keypad to select the tone style preferred, then press OK to confirm it.