Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
20
Note: management center is optional software to help user can easily configure our products,
please contact your reseller to know more about it.
7. [time] command
When sntp server is established as well as the sntp function of IP Phone 100 is enabled, type
time command should show the current time what is retrieved from the assigned sntp server.
Note: Please refer to the Chapter 4.6 [ifaddr] command to configure sntp server..
8. [ping] command
Command ping can test which the IP address is reachable or not.
Usage: ping “xxx.xxx.xxx.xxx(IP address)”
The message will display packets transmitting condition or no answer from the IP address.