Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
35
Step 4. Start configure
Most of all commands displayed in console / telnet are transfer to web interface. The most
important commands are Network Interface, H323 Information, Commit Data and Reboot System.
The method is as the same as command mode.
1.Network Interface
Please refer to chapter 3.6 [ifaddr] command.
- DHCP: Enable / Disable to DHCP mode
- IP Address: Set IP Address
- Subnet Mask: Set the Subnet Mask
- Default gateway: Set Default routing gateway
- Domain Name Server: Set Domain Name Server IP address
- SNTP: Enable / Disable the Simple Network Time Protocol
- SNTP Server Address: Set SNTP Server Address
- GMT: Set time zone for SNTP Server time
- IP Sharing: Enable it if behind IP Sharing router
- IP Sharing Server Address: Set WAN IP Address of IP Sharing Server router if it is a fixed
one.
- Management Center IP Address: Set Management Center Address
Please be noted:
If the WAN IP Address of IP Sharing Server router is not a fixed one, it is not necessary to
input any values.
If behind the dynamic WAN IP Address situation please configure as GK mode and select
TGK-103 Call Manager as proxy server.