Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
52
Chapter 5 Upgrade the IP Phone 100
IP Phone 100 supports two methods to upgrade the new version released from TTIC. Both methods
are necessary to prepare the TFTP program on the host PC as TFTP server. After installing TFTP
program on one PC and connecting to network, IP Phone 100 is ready to be upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
3. Web Management
Download Procedure
1.LCD Panel Control
1.Choose the 1 3 selection-Firmware Upgrade. Press OK to enter into the
sub-selection as below.
2.Download method
There are two methods to download new rom file, please move the “~” symbol by
press or on the keypad to select TFTP or FTP method, then press OK to
confirm it.
3.Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on the IP
Phone keypad. The IP address is necessary for upgrading IP Phone new application
rom file.
4.Set FTP user account
User has to press user name and password for FTP server login .It is necessary for
upgrading IP Phone new application rom file in FTP method.
5.Indicate file name
User has to press the file name of new application rom file prepared for upgrading
6.Start Download
Press OK to start download new application rom file .
7.Firmware Version
Show versions of all rom files.
Note: Download via LCD command can only upgrade new application rom
file.