Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
18
2. [quit] command
Type quit/exit/close will logout IP Phone 100 and Telnet Program.
3. [reboot] command
After typing commit command, type reboot to restart the IP Phone 100.
Sometimes after user type reboot, on terminal screen will display :"Data modified, commit to
flash rom?", which means IP Phone will record call history or not.(ex. REDIAL , outgoing and
incoming call data)
4. [flash] command
This command will clean the configuration stored in the flash rom to default value and reboot
the IP Phone 100.
Note: After user upgrade new software version, suggested to execute this command to make
sure new software work well on IP Phone 100.
Note: To execute the command flash –clean, all configuration of IP Phone 100
stored on flash rom will be cleaned. It is authorized for the user whose login name
is “root” only.