Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
24
12. [h323] command
1. –print: display H.323 stack information and configuration.
2. –mode: configure IP Phone 100 as GateKeeper or Peer-to-Peer Mode.
Usage:h323 –mode 0/1(0 for GateKeeper mode ,1 for Peer-to-Peer mode)
3. –gk: set Main GateKeeper IP address(h323 –gk “xxx.xxx.xxx.xxx”) or URL
address( Domain Name Server must be configured. Please refer to 6. [ifaddr] command) .
User can set IP as 255.255.255.255 and let IP Phone auto discovery for GateKeeper. Please
notice in this case, user must enable gatekeeper discovery function.Please refer to
5.-gkname and 10.-gkdis.
4. –dfgw:to set IP address of default gateway, this function is the same as Microsoft
NetMeeting.
A. To implement this feature both calling and called endpoints must be under
peer-to-peer mode.
B. If the called party is FXO products, such as TIG-404, which Have to set
sysconf –2nddial 0 to make one-stage dialing.
Dial remote PSTN number under default gateway, IP Phone will
automatically dial to default gateway, then default gateway will dial
this number to PSTN side.
For example, user wants to dial to ext.888 under TIG-404, user only
have to dial 888 from IP Phone.
C. If called party is FXS products such as TIG-404S : user can dial line
number of TIG-404S from IP Phone.
For example ,user wants to dial to TIG-400 the configuration of 3502 is
h323 –line1 101 –line2 102 user can press 101 or 102 dialing to line1 or
line2 of TIG-400.
5. –algk:set IP address or URL address( Domain Name Server must be configured. Please
refer to 6. [ifaddr] command) of alternative GateKeeper. If IP Phone tries to register to
main GateKeeper for 10 times but still fail, IP Phone will try to register to alternative
GateKeeper.
6. –gkname:set GateKeeper name for GateKeeper discovery. When IP Phone send out
GateKeeper discovery message will search GateKeeper with this GateKeeper name.(please
refer to 10.-gkdis)
7. –e164: identify one number for the IP Phone 100 to register to the GateKeeper
(h323 –e164 “X”).
8. –e164-x:user can assign other 10 telephone numbers .For example, 10 users share the same
IP Phone, they can assign phone numbers as 100, 200, 300….(h323 –e164 100 –e164-1
200 –e164-2 300….) User can disable one number and the number after this one. Ex. from
set 1-5 is configured, if user set the third number as “x”, from third to fifth number will be