Filter
Top Products
IP Phone 100 User Manual Guide Document Ver. 1.8
IP Phone Ver. 113/503(Normal and PPPoE)
13
(12) Management Center
Set management center IP address. IF user specifies management center IP
address, IP Phone will connect and send information to management center, let
user can easily configure via management center interface.
Note: 1.management center is our optional software to help user can easily
configure our products, please contact your reseller to know more about
it.
2.If user wants to disable Management Center function in LCD menu,
use can key in IP address 255.255.255.255.
(13) GRQ Option
To set auto discovery function OFF or ON. If this function is enabled and IP
address of GateKeeper is set as 255.255.255.255, IP Phone will multicast to
search a GateKeeper on network with configured GateKeeper ID(please refer
to (12)Gatekeeper ID); if IP address of GateKeeper is set, before IP Phone
register to the assigned GateKeeper, it will send out GRQ(GateKeeper Request)
message with configured GateKeeper name to GateKeeper first.
(14) GateKeeper ID
To set GateKeeper name for GateKeeper discovery. When IP Phone send out
GateKeeper discovery message will search GateKeeper with this GateKeeper
name
2. User Line Name
User has to identify one ID name for the IP Phone 100 to register to the GateKeeper.
3. Firmware Update
(1) Download method
There are two methods to download new rom file, please move the “~” symbol by
press or on the keypad to select TFTP or FTP method, then press OK to
confirm it.
(2) Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on the IP
Phone keypad. The IP Address is necessary for upgrading IP Phone new application
rom file.
(3) Set FTP user account
User has to press user name and password for FTP server login .It is necessary for
upgrading IP Phone new application rom file in FTP method.
(4) Indicate file name