Samsung iDCS 100 Telephone User Manual


 
C**************************** INDIVIDUAL TRUNKS **************************
1TRUNK 2TRUNK-NAME 3ATTA 4ANSD 5NOT-ANSD 6OUTGOING 7BUSY
701 0000 0000 0000 0000 0000
702 0000 0000 0000 0000 0000
703 0000 0000 0000 0000 0000
704 0000 0000 0000 0000 0000
705 0000 0000 0000 0000 0000
706 0000 0000 0000 0000 0000
707 0000 0000 0000 0000 0000
708 0000 0000 0000 0000 0000
709 0000 0000 0000 0000 0000
710 0000 0000 0000 0000 0000
1. TRUNK: A listing of each trunk in the system.
2. TRUNK NAME: The names of each trunk as programmed
in MMC 404.
3. ATTA: Average Time To Answer for trunks is counted in the number of seconds that
ringing voltage is detected at the trunk interface and the timer stops when trunk is
answered by station or device in the system. The ATTA is the sum of all answered
times divided by the answered call count.
4. ANSD: This is the number of times this specific trunk was answered by any station or
device whether it is a new call or a recall.
5. NOT-ANSD: This is the number of times this specific trunk rang the system but was
not answered. These are the same calls that would be flagged as abandoned in
SMDR.
6. OUTGOING: This is the number of times this trunk was used to make an outgoing
call. A valid outgoing call is defined by the SMDR START TIME programmed
in MMC
501.
7. BUSY: This is the number of times this trunk was busy when accessed by a button or
dial code.
D
**************************** STATION HUNT GROUPS **************************
<———————— 1 OUTSIDE CALL —————————————————————> 5 <-INTERCOM->
2GROUP 3ANSD 4NOT-ANSD 6ANSD
500 0000 0000 0000
501 0000 0000 0000
502 0000 0000 0000
503 0000 0000 0000
504 0000 0000 0000
1. OUTSIDE CALLS: These statistics are for outside calls that reach these station groups
regardless how they arrive there.
4.57
HOME
PAGE
Table of
Contents