Samsung iDCS 100 Telephone User Manual


 
4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account code key without interrupting a
conversation. Single line telephone users must temporarily interrupt the call by
hook-flashing and dialing the feature access code. Manually entered account codes
can be up to 12 digits long. In some cases users can be forced to enter an account
code and this account code may or may not be verified as described below.
FORCED – VERIFIED
When set for this option the user must enter an account code for all outgoing calls.
The account code entered will be verified from a system list of 500 entries. Forced
Verified codes can contain the digits 0~9.
FORCED - NOT VERIFIED
When set for this option the user must enter an account code for all outgoing calls,
but the account code is not verified against the system list. Non verified account
codes can contain the digits 0~9, * and #.
VOLUNTARY
In this case account codes are not required to make outgoing calls but may be
used if desired. This is also the method used to assign an account code to incom-
ing calls. These account codes can contain the digits 0~9, * and #.
ACCOUNT CODE KEY
The account code (ACCT) key can be programmed on any keyset and will appear
as a soft key on display keysets. This key allows the user to enter account codes
without interrupting a call.
ADMINISTRATOR PROGRAM KEY (Enhanced Version Software/MEM4)
Designated stations may be given the ability to administer a number of system
functions from their keyset using a flexibly assigned button. This key (PROG) when
pressed will request the station level passcode for that station and, when entered
correctly, will allow access to the following seven features: Station Lock for All Sta-
tions, Call Forwarding for All Stations, Station Name for All Stations, Program Mes-
sage for All Stations, System Date and Time, System Speed Dial, and System Speed
Dial Name.
ALL CALL VOICE PAGE
Users can page all internal and all external paging zones at the same time by
dialing the All Page code. Keysets may be restricted from making or receiving
4.3
HOME
PAGE
Table of
Contents