Samsung iDCS 100 Telephone User Manual


 
Call Forward Busy (CFB). This is a different feature from the normal call forward
busy and is only used when the forward destination is in a different node of the
network. The operation of the feature is the same as the normal forward busy where
when the forwarded station is busy a calling station will be forwarded to the for-
ward destination.
Call Forward No Response (CFNR). This is a different feature from the normal call
forward no answer and is only used when the forward destination is in a different
node of the network. The operation of the feature is the same as the normal forward
no answer where when the forwarded station does not answer after a programmed
amount of time a calling station will be forwarded to the forward destination.
Call Forward Unconditional (CFU). This is a different feature from the normal call
forward all and is only used when the forward destination is in a different node of
the network. The operation of the feature is the same as the normal forward all
where all calls to the forwarded station will be forwarded to the forward destination.
Forward External. This feature operates in the same manner as a non networked
system with the exception that, because calls across a network link are trunk calls,
network calls do not follow the ICM FWD EXT ON/OFF setting in MMC 210. It is
therefore suggested that this setting be set to ON in a networked switch to avoid
confusion in operation between networked and non networked calls.
Call Intrusion (Barge In). This feature operates in the same manner as in a non
networked switch.
Call Offer/Call Waiting (Camp On). This feature operates in the same manner as in
a non networked switch. When a called station is busy the caller can press a camp
on key and appear as a ringing call on the second call button. The Auto camp on
feature will not work on calls across a network link if set to ON in MMC 110.
Call Transfer. Calls answered in one network node can be transferred to a station or
station group in another network node.
Transfer Retrieve. Calls on Transfer Hold during a screened transfer can be re-
trieved by pressing the call button for that call.
Transfer Recall. Calls transferred across a network link will recall to the transferring
station after the originating systems transfer recall timer expires. After recalling, if
not answered prior to that systems attendant recall timer expiring, the call will re-
call to that systems designated operator group. Attendant recalls will not recall to a
‘Centralized Attendant”.
DID with Pass Through. Incoming DID, DNIS or DDI calls can be routed through one
switch across a network link to be processed by the DID table of the destination
switch.
4.21
HOME
PAGE
Table of
Contents