Filter
Top Products
32 BUTTON AOM
The DCS 32-button add-on module (AOM) adds to the capability of any keyset. The
32 programmable buttons with red buttons can be used for feature keys, DSS/BLF
keys or one touch speed dial buttons. Because this AOM has a microphone and a
speaker it can be used to provide executive off hook voice announce or as a stand
alone unit whenever a handset and dial pad are not required.
64 BUTTON MODULE
The 64-button module adds to the capability of any keyset. Up to four 64-button
modules can be added to each keyset. The 64 programmable red LED buttons
with red LED can be used for feature keys, DSS/BLF keys or one touch speed dial
buttons. A maximum of 4 can be installed on a iDCS 100 system.
APPOINTMENT REMINDER
Keysets with an alarm key can be used like an alarm clock. When programmed for
a specific time, the keyset will sound a distinctive ring to remind the user of meet-
ings or appointments. Alarms can be set for “today only” or for every day at the
same time. Up to three alarms may be set at each keyset. Display keysets can also
show a programmed message when the alarm rings.
AUTO ANSWER ON CO
This allows new CO calls directed to a certain keyset to auto answer and be in the
call announce mode. This means that private lines and DID calls can be “auto
answered”. Transferred calls and calls to a station group of which that keyset is a
member will continue to ring.
AUTOMATIC HOLD
Station users can enable or disable automatic hold at their keysets. While a user is
engaged on an outside (C.O.) call, pressing another trunk key, route key or CALL
button automatically puts the call on hold when this feature is enabled. Pressing
TRSF, CONFERENCE, PAGE or a DSS key will always automatically place the call
on hold. This type of automatic hold is not a user-selectable option. Intercom calls
can not be automatically held except when using transfer, conference, or page.
AUTOMATIC PRIVACY
All conversations on outside lines and intercom calls are automatically private. The
privacy feature can be turned off on a per-line basis.
NOTE: Intercom calls cannot be automatically held.
BACKGROUND MUSIC
Keyset users may choose to hear music through their keyset speakers when op-
tional external sources are installed. Each user may adjust this level by the use of a
volume control program at the selected keyset.
4.32
HOME
PAGE
Table of
Contents