Samsung iDCS 100 Telephone User Manual


 
OVERRIDE CODE
This feature allows users to make emergency outside calls from a station that has a
forced code such as Account code or authorization code enabled but without re-
quiring them to enter a forced code. The basis of this feature is an override code
table containing 5 entries of up to 11 digits each. The iDCS 100 will examine digits
that are dialed from a station to see if they match any entry in the Override Code
table. If the digits match the table, the system will process the call without requiring
a forced code.
PAGING
System software allows the use of four internal and four external paging zones.
Stations can page any individual zone, all internal zones, all external zones or all
zones simultaneously. Using system programming, each station may be allowed
or denied the abilities to make and/or receive page announcements to any zone or
combination of zones.
PARK ORBITS
The system has 10 park orbits (0–9). These orbits can be used to park calls prior to
paging and allows the call to be retrieved by dialing a park code plus the orbit
number. Calls parked in this manner can also be retrieved by dialing the park
pickup code (10) plus the station or trunk number. This feature is in addition to Call
Park and Page.
PRIME LINE SELECTION
Any station can be programmed to select a specific line, trunk group, telephone
number, station or station group when the handset is lifted or the speaker key is
pressed (same as Hot Line feature).
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE TIMERS
There are over 50 programmable system timers to allow each installation to be
customized to best fit the end user’s application.
RECALLS
Calls put on hold, transferred or camped-on to any station will recall to the originat-
ing station if not answered within a programmable time. A recall that goes unan-
swered for the duration of the attendant recall timer will recall to the system opera-
tor group. Hold, transfer, camp-on and attendant recalls have individual program-
mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.
RECALL TO OPERATOR
This function will allow the call to recall the operator instead of the transfering sta-
tion after the transfer recall time expires.
4.23
HOME
PAGE
Table of
Contents