Samsung iDCS 100 Telephone User Manual


 
FORWARD DND
This feature works with the Do Not Disturb feature. This allows calls directed to a
station in Do Not Disturb or One Time Do Not Disturb to forward immediately to
another destination.
FOLLOW ME
This feature allows the user to forward all calls from another station to the user’s
station or change the forward destination to the user’s current location.
EXTERNAL
This feature forwards C.O. calls to an external number via a central office trunk if
allowed by class of service. Intercom calls may also be programmed to forward to
an external number via a central office trunk. These calls will forward only after the
programmable external call forward delay timer expires. This timer is program-
mable on a per station basis.
TO VOICE MAIL
Each station may be programmed to allow or deny the ability to forward intercom
calls to voice mail. When denied, valuable message time in the voice mail system
can be saved.
PRESET DESTINATION
If desired this feature provides for a permanent (preset) forward no answer desti-
nation for each extension. It can only be programmed by the system technician or
system administrator. When any station does not have FWD/NO-ANSWER set, the
call will ring this preset destination if one is programmed.
PRESET FORWARD BUSY
This feature allows the Preset Forward No Answer setting to also work for Busy
Status. When PRESET BUSY is turned on the calls will follow the preset for both
busy and no answer conditions.
CALL FORWARD BUSY (CFB) (Enhanced Version Software/MEM4)
This is a different feature from the normal call forward busy and is only used when
the forward destination is in a different node of the network. The operation of the
feature is the same as the normal forward busy where when the forwarded station
is busy a calling station will be forwarded to the forward destination. The Call For-
ward Busy and the Call Forward No Response can be activated at the same time
by using MMC 102.
CALL FORWARD NO RESPONSE (CFNR) (Enhanced Version Software/MEM4)
This is a different feature from the normal call forward no answer and is only used
when the forward destination is in a different node of the network. The operation of
the feature is the same as the normal forward no answer where when the forwarded
station does not answer after a programmed amount of time a calling station will
4.9
HOME
PAGE
Table of
Contents