group basis and when set to the ON setting, allows an intercom caller to hear a
busy signal when calling a station group. Upon hearing a busy signal the intercom
caller will know that all stations are busy and can call back. When this option is set
to the OFF position the intercom caller will hear ring-back tone when all stations are
busy and the call will queue for the next available station.
HOT LINE
Stations can be programmed to call a pre-defined station or station group when-
ever that station goes off-hook. A hot line delay timer of 0–250 seconds can be
programmed to allow sufficient time to make a different call. This timer is program-
mable on a per station basis.
IN GROUP/OUT OF GROUP
Individuals assigned to a station hunt group may temporarily remove their tele-
phones from the group by pressing the In/Out of Group button providing that there
is someone still in the group. There is a system wide option to allow all members to
log out of a station group. Stations out of a group will not receive calls to that group
but will continue to receive calls to their individual extension numbers. When de-
sired, the user may put him/herself back into the group by pressing the button
again. Users who do not have this button may dial the access code and the group
desired. A station user is allowed to be in several groups, providing a key and the
extender of that group are assigned for each group on the user’s phone.
INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This al-
lows all members of the group to share the call load.
INCOMING/OUTGOING SERVICE
Outside lines are available for incoming or outgoing service. Programming allows
any outside line to be used for incoming calls only, outgoing calls only or both way
service.
INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dial-
ing out as well as allow or deny answering for each outside line.
INTEGRATED VOICE MAIL
The iDCS 100 can be equipped with Samsung’s proprietary voice mail/auto atten-
dant card. This card provides 4 to 8 ports of voice processing. Because it is built
into the system it provides such features as one touch call record, answering ma-
chine emulation, and voice mail box administration with interactive keyset displays.
ISDN CALL PROGRESS MONITOR
This new feature option is to allow customers using Central Office based Account
Codes to place calls over PRI. When activated, calls over a PRI circuit will be ca-
4.17
HOME
PAGE
Table of
Contents