Filter
Top Products
z Modify digits table 100 entries for an iDCS 100 system.
z Flexible trunk group advance timer
z Option to use or not use trunk group advance warning tones
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset or personal computer
without interrupting normal system operation. There are 3 levels of programming:
technician, customer and station. The technician level has access to all programs
and can allow the customer access to system programs as needed. Technician
and customer access are controlled by different security passcodes. Programming
from a PC requires the PCMMC program. The system can also be programmed
remotely via an optional modem card or over the internet via the LAN with a MEM4.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the
paged party to meet the user for a private conversation.
MEMORY PROTECTION
In the event that power is lost to the system, all customer data contained in memory
is retained by the use of a “super capacitor” for approximately 7 days. The PCMMC
computer program may be used to produce a backup copy of the customer data.
MESSAGE WAITING INDICATIONS
When calling a station and receiving a busy signal or the no answer condition, the
caller can leave an indication that a message is waiting. The message button will
flash red at the messaged keyset. A single line phone will receive a distinctive
message waiting dial tone. Five message waiting indications can be left at any
station.
MICROPHONE ON/OFF PER STATION
The microphone can be disabled at any keyset. When the microphone is disabled,
the keyset cannot use the speakerphone, although on-hook dialing and group lis-
tening are still possible.
MULTIPLE LANGUAGE SUPPORT
The iDCS 100 can be programmed to support multiple languages in the display.
This is on a per-keyset option and when set the keyset wil have its display informa-
tion presented in the programmed language. The languages are defined in MMC
121. The current languages are as follows: English, Spanish, Italian, German, Por-
tuguese, Norwegian, Danish, Dutch, Swedish, US Spanish, and Canadian French.
MUSIC ON HOLD—FLEXIBLE
The iDCS 100 allows its music sources to be used in a very flexible manner as
follows:
4.19
HOME
PAGE
Table of
Contents