Filter
Top Products
3.3 PT Programming
276 Feature Guide
Note
This programme enables the PBX to include page breaks when printing out call logs for each extension.
SMDR Mode for Printing [929]
Note
Even if "On" (outgoing/incoming call) or "Toll" (outgoing call) is selected in Incoming/Outgoing Call
Selection for Printing [802], when "MODE 2" is selected in this programme, the call log information is
not displayed by SMDR, but the information for each extension is displayed by Call Log Printout.
Feature & Programming References
1.20.1.1 Station Message Detail Recording (SMDR)
1.20.1.2 Call Log Printout for Each Extension
Call Forwarding Selection [963]
Note
This programme also functions for outside (CO) line calls via the DISA Intercept Routing feature, and
when DISA calls are received by a DISA ring group.
Feature & Programming References
1.3.1.2 Call Forwarding (FWD)
CO Line Mode—Day/Night/Lunch [414-416]
TRS Check after Answering [966]
Note
This programme specifies whether the PBX checks DTMF signals when answering calls or not.
9 2 9
NEXT
SELECT
STORE END
(MODE 1/MODE 2)
9 6 3
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
9 6 6
NEXT
SELECT
STORE END
(Enable/Disable)