Filter
Top Products
1.18 Proprietary Telephone (PT) Features
Feature Guide 141
1.18.4 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Display Item Display Example Conditions
The extension number and name of the
calling or called extension
123: Tom Smith Extension numbers and names
are programmable ( Extension
Number [009], Extension Name
[604]). If an extension name is not
stored, only the extension number
will be displayed.
The status of the called extension 123: Busy –
The name and number of the doorphone DoorPhone 1 –
The telephone number dialled 1234567890 –
The extension number and name of the
calling extension after the call is
forwarded
102:Mike –
The received call information The first line message can be
either (a) or (b) at each extension
through system programming (
Caller ID Log Priority [904]).
a) Caller's name ABC Company
b) Caller's number 12345678
c) Outside (CO) line number Call on CO 1
The call charge of the current outside
(CO) line call
CO1: 12.35 EUR The charge of a call is displayed
when Call Charge Calculation is
enabled through system
programming ( Call Charge
Calculation [441]). Settings such
as the call charge rate, decimal
point position and currency can
be assigned through system
programming ( 1.20.2 Call
Charge Calculation).
The duration of the current outside (CO)
line call
CO 1 0:01'15 The display remains for 5
seconds after the call is finished.
The outgoing outside (CO) line
call duration starts when the
specified time expires ( Call
Duration Counter Start [204]).
The display does not show the
duration of intercom calls.