Filter
Top Products
3.3 PT Programming
Feature Guide 247
Call Charge Table Assignment [442]
Feature & Programming References
1.20.2 Call Charge Calculation
DISA Incoming Call Dial Mode [500]
Note
Without AA: Available destinations are extension numbers assigned in Extension Number [009],
Outside (CO) Line Access numbers (9/0 [for New Zealand: 1 or 9], 81 through 88), and the Operator
Call number (0 or 9)
With AA: Available destinations are numbers available in "Without AA" mode and numbers (0 through
9) assigned in DISA Built-in AA [501]
Feature & Programming References
1.15.6 Direct Inward System Access (DISA)
DISA Built-in AA [501]
Note
If you would like to use the Automatic Line Access number (9/0 [for New Zealand: 1 or 9]) and/or
Operator Call number in AA mode, do not assign AA number(s) that correspond to Automatic Line
Access or Operator Call numbers (9 and/or 0).
Feature & Programming References
1.15.6 Direct Inward System Access (DISA)
4 4 2
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Table1/Table2/
Table3/Table4)
5 0 0
NEXT
SELECT
STORE END
(Without AA/
With AA)
5 0 1
NEXT
AA no.
STORE END
(0
…
9)
(Jack/GRP/
3-level AA/
Not Stored)
To continue
SELECT
NEXT PREV
or
(01
…
24)
extension
jack no.
extension
group no.
(1
…
8)
or