Filter
Top Products
1.20 Administrative Information Features
Feature Guide 163
a) If the Call Duration is less than the Flat Duration:
b) If the Call Duration is more than the Flat Duration:
[Programming Example] (Using the example shown in "3. Call Charge Table")
If the dialled number is "03XXXX", and the call is made at Peak time.
a) If the Call Duration is 160 s:
b) If the Call Duration is 250 s:
5. Call Charge Display
Information about the call charge can be shown on the display of a PT. The display can contain up to 3
characters (e.g., EUR for Euro) for the currency ( Currency [921]) and up to 7 digits, excluding the
decimal point, for each call charge. The decimal point position (the number of significant decimal digits)
for the charge can also be programmed ( Decimal Places [190]). Additionally, the order in which
information is displayed can be programmed ( LCD Display Mode [630]). For more information, refer
to "1.18.4 Display Information".
6. Budget Management
It is possible to limit telephone usage to a preprogrammed budget on each extension ( Budget
Management [925]). For example, an extension in a rented office may have a prepaid limit for telephone
usage. If the total of call charges reaches the limit, the extension user cannot make further outside (CO)
line calls ( Budget Limit Selection [926]). An extension assigned as the manager can increase the
limit or clear the previous call charges. For more information, refer to "1.8.3 Budget Management".
7. Call Charge Management
An extension assigned as the manager extension can access the following features through manager
programming:
a. Call Charge Reference and Clear, for Each Extension/Each Outside (CO) Line/Account Code
b. All Clear
Flat ChargeCall Charge
=
Flat Charge Unit Charge Unit Charge Whole Number Part of
Unit Duration
Call Duration Flat Duration
Call Charge
=
Flat Charge
Call Charge 100
=
Unit Duration
Call Duration
Flat Duration
Flat Charge
Call Charge 100 50
50
250
30
180
2.333...
2502
==
=
Unit Charge
Unit Charge