Filter
Top Products
1.22 Audible Tone Features
Feature Guide 169
1.22 Audible Tone Features
1.22.1 Dial Tone
Description
The following dial tones inform extension users about features activated on their extensions:
Conditions
• Dial Tone Type for ARS/Account Code Entry (Verify-Toll mode only)
Through system programming, it is possible to select the dial tone type for the Automatic Route
Selection (ARS)/Account Code Entry (Verify-Toll mode only) feature ( ARS Dial Tone [362]).
Feature Guide References
4.2.1 Tones/Ring Tones
Type Description
Tone 1 A normal dial tone is heard when none of the features listed for dial tones 2
through 5 have been set.
Tone 2 Heard when any of the following features is set.
• Absent Message
• Background Music (BGM) (for proprietary telephones [PTs] only)
• Call Forwarding (FWD)
• Call Pickup Deny
• Data Line Security
• Do Not Disturb (DND)
• Extension Lock
• Hot Line (for single line telephones [SLTs] only)
• Message Waiting (for PTs only)
• Remote Extension Lock
• Timed Reminder
Tone 3 Heard when any of the following features is performed.
• Account Code Entry
• Answering a call from Timed Reminder
• Going off-hook with an SLT that has messages waiting
Tone 4 Heard when going off-hook if new voice messages have been recorded (Built-in
Voice Message [BV]).
Tone 5 Heard when going off-hook if the remaining voice message recording time is less
than 5 minutes or if 125 voice messages have been recorded (Built-in Voice
Message [BV]).