Filter
Top Products
3.3 PT Programming
Feature Guide 221
SLT Ring/Silence Ratio [142]
Note
This programme selects the ratio between the bell signals of an SLT (a set of bell-on and bell-off).
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
SLT Ring Bell-on Time [143]
SLT Ring Bell-on Time [143]
Notes
• This programme selects the length of the bell-on signal of an SLT. This determines the ring tone
pattern for incoming calls to SLTs, combined with the setting in SLT Ring/Silence Ratio [142].
• This programme also determines the maximum number of digits of an SLT Caller ID number, when
"DTMF1" or "DTMF2" is selected in SLT Caller ID Signalling Type [150].
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.16.1 Caller ID
SMS Centre Number for Receiving [145]
Feature & Programming References
1.17.3 Fixed Line SMS Terminal Support
SMS Routing Table—CO [146]
1 4 2
NEXT
SELECT
STORE END
(1:2/1:3/1:4)
[On:Off]
1 4 3
NEXT
SELECT
STORE END
(1000
…
2000 ms)
[100 ms increments]
1 4 5
NEXT
SMS centre no.
STORE END
Max. 16 digits
(0
…
9, , #)
1 4 6
NEXT
CO line no. name*
STORE END
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Disable/1
…
8)
(1
…
8)