Filter
Top Products
1.20 Administrative Information Features
160 Feature Guide
• SMDR Mode for Printing
One of the following modes can be selected through system programming ( SMDR Mode for Printing
[929]):
a) MODE 1
Outside (CO) line call information is displayed by SMDR ( 1.20.1.1 Station Message Detail
Recording (SMDR)), and call log information for each extension is displayed by Call Log Printout.
b) MODE 2
Only call log information for each extension is displayed by Call Log Printout.
• It is possible to control whether a secret dialling number stored in System Speed Dialling Number [001]
or stored as a One-touch Dialling button is shown by Call Log Printout ( Secret Number SMDR Print
Suppression [803]). When "Secret" is selected, numbers dialled secretly will be shown as dots.
• It is possible to control whether "Dial number" is shown by Call Log Printout ( Secret Printing [924]).
• Before changing the decimal point position ( Decimal Places [190]), clear all Call Log Printout data.
Otherwise, the charge value for the accumulated data will be displayed incorrectly.
Installation Manual References
2.3.8 Message Expansion Card for DISA/UCD OGMs (KX-TE82491)
4.1.5 System Reset with System Data Clear
User Manual References
3.2.2 Changing Call Logs and Call Charges