Filter
Top Products
3.3 PT Programming
236 Feature Guide
CO Line Connection [400]
Note
The numbers of outside (CO) line ports that do not have lines connected should be set to "Not connect".
The PBX seizes the highest available outside (CO) line number when selecting an idle outside (CO)
line automatically. If an unconnected outside (CO) line number is set to "Connect" and is numbered
higher than any connected outside (CO) line number, the PBX will try to seize the unconnected outside
(CO) line.
Feature & Programming References
1.5.3.2 Line Preference—Outgoing
1.5.3.3 Outside (CO) Line Access
Dial Mode [401]
Note
This programme is not available for the AL (Australia) model.
Feature & Programming References
1.5.2.4 Dial Type Selection
4 0 0
NEXT
CO line no. name*
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Connect/
Not connect)
4 0 1
NEXT
CO line no. name*
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(DTMF/Pulse/
Call Block mode)