Filter
Top Products
SIP Server and SIP Accounts
Page 22 Mitel
®
5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010
The web server gives access to the following additional settings.
Name Values Description
SRV_0_SIP_URI_DOMAIN_CONFIG 0 (default) This parameter specifies how a destination URI
of the format SIP:<user>@<domain> for an
outgoing call must be specified with respect to
the <domain> part.
Possible values are:
0: If application omits <domain> the value from
the Domain parameter will be added.
1: Application must specify full URI.
2: Doesn’t matter what application defines, the
<domain> will be replaced by Domain parameter
SRV_0_SIP_UA_DATA_SERVER_PO
RT
5060 (default) Defines the listening port of the extern proxy-
server / registration-server port.
SRV_0_SIP_UA_DATA_SERVER_TYP
E
0 (default) Specifies the type of server. Allowed values are
(bitfield):
1: Voice server (bin: 00000001)
2: EMS (bin: 00000010)
4: Infopush server(bin: 00000100)
SRV_0_SIP_UA_DATA_SERVER_IS_L
OCAL
SRV_0_SIP_UA_DATA_REREG_TIME 3600 (default) Specifies the time between re-registration at reg-
server. Time in seconds.
SRV_0_SIP_UA_DATA_PROXY_POR
T
SRV_0_DTMF_SIGNALLING 0 (default) Specifies how to transmit DTMF signalling.
0: In-band generation, 1: SIP-Info, 2: RTP
Named Event (RFC2833).
SRV_0_SIP_UA_CODEC_PRIORITY 1, 0, 2, 4, 0xFF
(default)
PCMU 20ms (0), PCMA 20ms (1), iLBC 20ms
(2), iLBC 30ms (3), G729AB (4)
It is not possible to select both iLBC 20ms and
iLBC 30ms in the same priority list.
Unused entries must be 0xFF (255).
SUBSCR_0_SIP_UA_DATA_VOICE_M
AILBOX_NAME
String (max 40
characters)
Voice Mailbox uri like
sip:alice@vmail.example.com
SUBSCR_0_SIP_UA_DATA_VOICE_M
AILBOX_NUMBER
String (max 22
characters)
Voice Mailbox number
Sip address/ phone number used when listening
to messages